Description
Baer Brakes Tracker Tie Rod/Bump Steer Kit
The Baer “Tracker” adjustable tie-rods feature 6061 T-6 aluminum, fully machined sleeve with a black anodized finish, a Teflon lined 5/8” heim joint and 4140 steel pin which. The pin is machined with the correct taper so no modification to the OE spindles is required and then heat treated. The Trackers Tie Rods are vehicle specific, mounting to the OE inner tie rod and offer approximately .875” of adjustment at the spindle to help correct bump steer issues due to modified suspensions and/or poor OE design. Best of all these are made in the USA!
- Direct bolt on upgrade
- Black E-Coated for Rust Protection
- Fully adjustable
- Simple installation
- Tapered pin for NO spindle modifications
- Vehicle specific
Specification:
| Adjustable | Yes |
|---|---|
| Adjusting Sleeve Included | Yes |
| Adjustment Range | 0.875 |
| Applications | 1975 Pontiac Firebird with stock spindles Note: There are 2 Factory Tie Rods on the 1975 Firebird. This Tracker is for the late design with OE outer end measuring 8.750″ from center of bowl to end of tie rod. |
| Applications | 1973-77 GM A-Body cars with stock spindles |
| Applications | 1976-81 Pontiac Firebird with stock spindles |
| Applications | 1971-72 GM A-Body cars with GM B-Body spindles |
| Applications | 1980-81 Chevrolet Camaro “6 cylinder only” with stock spindles |
| Axle | Front |
| Boot Color | N/A |
| Box Count | 1 |
| Brand | Baer Brakes |
| Castle Nut Included | No |
| Category | Steering |
| Color | Black |
| Cotter Pin Included | No |
| Dust Boot Included | No |
| Emission Code | 6 |
| End 1 Gender | Female |
| End 2 Gender | Female |
| Export Description | Suspension Components |
| Finish | Black e-coated |
| Grade Type | Premium |
| Grease Fitting Included | No |
| Greaseable | Yes |
| Head Drive Type | Hex |
| Heim Joint | Teflon lined 5/8” heim joint |
| Housing Material | 6061 T-6 aluminum |
| Includes | 2x Tie Rods |
| Inner Sleeve Thread Size | 11/16″x18 LH Thread |
| Locking Nut Included | Yes |
| Manufacturer Restriction | None |
| Mounting Hardware Included | Yes |
| Outer Sleeve Thread Size | 5/8″x18 RH Thread |
| part type | Steering Tie Rod End |
| Pre-Greased | Yes |
| Product Line | Steering Tie Rod End |
| Product Type | Bump Steer Kit |
| Prop 65 – Short Label | WARNING: Cancer Harm – www.p65warnings.ca.gov |
| Quantity | 1 |
| Reinforced | Yes |
| Sleeve Length | 9.7 |
| Steering Type | Manual |
| Sub Category | Steering, Gear and Related Components |
| System Notes | 8.75 inch eye of ball to end of sleeve |
| Thread Direction | Right Hand Thread |
| Tie Rod Material | 6061 T-6 aluminum |
| Title | Baer Brakes Tracker Adjustable Front Tie Rods Bump Steer Kit for 1973-1977 GM A-Body |
| Tube Diameter | 5/8″ |
| Type | Straight |
| Universal Or Specific Fit | Specific Fit |
| Washer Included | Yes |
| Weight | 5 |
